免费无码又爽又刺激高潮虎虎视频,激情欧美成人久久综合,国产精品高潮露脸在线观看,久久久久久久99精品免费观看

Detailed description of each component characteristics of trough type mixer.
Trough type mixer for stainless steel horizontal trough type mixer is used for mixing of powdery, or wet in the pharmaceutical, chemical, food, different ratio of main materials mixed evenly. Trough type mixer and contact materials are made of stainless steel, the blade and the barrel body clearance is small, mixed no dead angle, the stirring shaft are provided with a sealing device, can prevent material leakage. Trough type mixer mixing part is a through shaft with single propeller design blade angle, single oar is very reasonable, single propeller rotates, the material rolling up and down, while the blade through the material, have a certain angle to the mixing tank around both sides of the pushing force, the mixing tank any corner material could not rest the mixing tank, automatic turnover dumping. So the materials are mixed uniformly. Widely used in pharmaceutical, chemical, food industry etc.. Sealing method of sealing, sealing nut, adjusting compensation axial pressure surface using trough type mixer. Practice has proved that the effect is better. The machine can be timing mixing, stirring just before the set time, then the automatic shutdown. Saving energy, can prevent the operator from the machine after the machine is still not outage accident to cause. The machine are made of closed stainless steel, meet the requirements of GMP.
  Trough type mixer mainly consists of stirring speed reducer, mixing tank, frame and motor device, electric control box and automatic mixing equipment lubrication of machine parts. The following introduces characteristics of these components:
  1, stirring speed reducer:
  The speed reducer for mixing machine main transmission structure, it is located right trough type mixer, when the device motor in the machine base in the triangle belt transmission worm and worm wheel, gear driven mixer with 1:40. The worm gear shaft is hollow and is equipped with a fixed key, can make the stirring paddle free assembly and disassembly. Reducer are installed on the top of the 2 ring screw, for assembly and disassembly, installation and use. The end cover is provided with a screw for high speed stirring paddle orientation, has been adjusted in the factory, generally in use do not have to adjust.
  2, the mixing tank:
  Mixing trough type mixer is U shape, made of stainless steel, installed inside the impeller, mixing tank propeller blade, as well as some contact with the drug, good acid, alkali, corrosion resistance. Impeller are provided with a sealing cleaning device, to prevent the leakage of materials, but also can prevent dirt into the mixing tank. It lies in a stirring speed reducer and the pouring speed reducer. The rotating blades by using S shape, in the mixing process of material exchange between large quantity, high efficiency.
  3, the pouring speed reducer:
  The pouring speed reducer for positioning control mixing groove angle, it is located in the machine left, when the device is in the frame of the motor through a triangle belt transmission worm and worm wheel, drive the mixing tank rotating in a certain angle range, so that the mixture once poured out. Reducer lubrication by oil immersed, the oil must be standard in the oil line, the oil must be kept clean. Such as often use should be every three months for a new oil should be replaced at the same time, the speed reducer is washed clean, add new oil.
  4, the base and motor device:
  The base is an integral structure, the motor is arranged on both sides of the movable plate in the base, the motor can be adjusted on the screw, the triangle belt be elastic, maintain the momentum.
  5, electrical control box:
  The control box is to control the movement of the machine, it is located on the right side of the machine, mixing tank transmission can be a mixing tank "Shang" and "Xia" button, pay attention to both cannot be simultaneously press.
Related News:
· Innovation, energy saving, environmental protectio  
· Vacuum dryer product performance characteristics a  
· Vacuum dryer used for inspection and debugging wor  
· Difficulties and reasons cannot start mixing machi  
· The correct operation method using vacuum dryer  
· Development advantages and characteristics of dome  
· The difference between the special vacuum dryer an  
· Detailed description of each component characteris  
· The dominant position in the whole vacuum dryer dr  
· Trough type mixer sometimes appear large area leak  
Related Products:
· PGL Spray Drying Granulator
· High speed mixer
· SET series double screw extrusion pelletizer
· VI forced mixer
· Mixing machine W series
· Powder machine ZSJ series vibrating screen
· FZ series of crushing granulator
· Chinese medicine grinder
· DWT series of drier for dehydrated vegetables
· Multi-layer belt dryer

Copyright 2013 Chang Zhou Zhizun Machinery Co.,Ltd All Rights Reserved.Design by Reach.
Tel:86.519-88906508 Fox:86.519-88902679 Add:Jiaoxi Changzhou Jiangsu Pro China P.C:213116

国产一区二区三区 韩国女主播| 欧美精品亚洲精品日韩专区va| 日韩久久久久久中文人妻| 国产又黄又硬又湿又黄的视| 窝窝午夜福利无码电影| 丰满少妇人妻无码| 亚洲欧美日韩国产制服另类| 免费无码成人av片在线在线播放 | 99久久久国产精品消防器材| 午夜精品久久久久久久久日韩欧美| av无码午夜福利一区二区三区| 国产亚洲视频在线播放香蕉| 伊人情人综合网| 伊人久久大香线蕉综合75| 国产午夜亚洲精品一区| 成人性无码专区免费视频| 手机国产乱子伦精品视频| 国产玖玖玖玖精品电影| 久久精品aⅴ无码中文字字幕| 2020国产精品午夜福利在线观看| 无码专区狠狠躁天天躁| 精品无人区无码乱码大片国产| 欧洲熟妇色xxxx欧美老妇| 婷婷六月在线精品免费视频观看| 一区一区三区产品乱码亚洲| 国产又色又爽又黄刺激的视频| 日本高清www午色夜在线视频| 国产免费久久精品国产传媒| 亚洲高清无码加勒比| 亚洲色大成网站www| 欧美老妇乱辈通奷| 亚洲а∨精品天堂在线| 亚洲成a∨人片在无码2023 | 久久天天躁狠狠躁夜夜2o2o| 久久久精品无码中文天美| av夜夜躁狠狠躁日日躁| 18禁成年无码免费网站| 狠狠躁18三区二区一区| 国产av亚洲精品久久久久李知恩| 国产末成年女av片一区二区| 人人爽人人爽人人片av免费|