免费无码又爽又刺激高潮虎虎视频,激情欧美成人久久综合,国产精品高潮露脸在线观看,久久久久久久99精品免费观看

The impact of swing particle production yields What are the factors?
Rock particles machine in the granulation process, there are many factors that affect normal play rock particles, factors affecting the production yield of the rock particles have the following:
  1, moisture materials quenched and quenched and suitable water should be between 15.0% -16.5% specific judgments hand into a group, let go to spread appropriate. When quenched and tempered water is more than 18%, the material is easy to slip ring mold wall and the pressure roller, not even pressed pellets, reduce granulation production. Quenched and tempered water is less than 14%, the materials intense friction with the rock particles machine, reducing the granulation production.
  2, the new ring die of the mold Kong Guangjie degrees due to the inner wall of the die orifice is attached a part of the scrap iron, oxides, etc., before use should be performed polishing treatment, so that the inner wall of the die hole is smooth, to reduce friction and improve the yield of granulation.
  3, roll, roll and ring die mode spacing gap greater impact on pellet quality, general gap should be between 0.05-0.3 mm. When the gap is greater than 0.3 mm, the material layer is too thick, and the uneven distribution, reducing the granulation yield. When the gap is less than 0.05 mm, the machine is badly worn. Roll mode spacing determination method: general adjustment to boot the pressure roller when the rotation will not be diverted or grasping material thrown into swing pellet machine can hear a bang sound as well.
  4, swing the particle machine mold plug the hole no polishing treatment caused mainly by granulation poor performance materials or new mold or granulation unused after the cleanup of the oily materials. Found mold plug the hole, Application drill red open, less red open ring mold should be immersed in the tin with oil heating tin, hear the bang sound can be directly used to granulation.
  5, the cooling particle feed cooling is not sufficient, loose particles, increased by Lifting powder. The powder sieved after reflux granulation, thereby reducing the granulation yield.
  6, reduce the volume of feed volume of feed, even if the swing of pellet machine operator Quenched level again high, it is impossible to increase production.
  7, the materials and the coefficient of friction of the roll, mold material and the pressure roller, the ring mold inner surface friction coefficient hours, the material easy to slip, thus reducing the yield. The coefficient of friction of the material and the inner wall of the die orifice is too large, it will cause the material is pressed no die orifice, reducing the granulation yield. Factors affecting the friction coefficient formula, quenched and tempered, mechanical themselves.
  Feed scraper longer use time rock particles feed scraper wear serious, so enter the roller feed reduced modulus grab range, which reduces the yield of rock particles, and the rate of increase containing powder.
  9, the opening rate of the opening rate of the ring mold a great impact on production, to ensure the ring mold strength Aperture large general opening rate, granulating production is also high.
  10, aperture, depth to diameter larger than the aperture ring mold, granulating production, but also should choose the depth to diameter ratio. The thickness of the die hole is too large, low-yield, high hardness; small thickness of the die hole, small particle hardness meet quality requirements. 4.0 mm aperture, for example, the depth to diameter ratio range: high cereal content feed 9.5-12.5, heat-sensitive class materials 4.8-8.0. Wherein the large value should be in the 1% -2% of oil is added selection.
  Often encounter the problem of production is less than ideal rock particles mechanism granulation process, but granulation staff can find solutions according to the specific circumstances, it can make the efficient running of the rock particles machine, you can refer to the above method in the operation of rock particles machine not because the operating factors affecting the normal operation of the rock particles.
Related News:
· Innovation, energy saving, environmental protectio  
· Vacuum dryer product performance characteristics a  
· Vacuum dryer used for inspection and debugging wor  
· Difficulties and reasons cannot start mixing machi  
· The correct operation method using vacuum dryer  
· Development advantages and characteristics of dome  
· The difference between the special vacuum dryer an  
· Detailed description of each component characteris  
· The dominant position in the whole vacuum dryer dr  
· Trough type mixer sometimes appear large area leak  
Related Products:
· PGL Spray Drying Granulator
· High speed mixer
· SET series double screw extrusion pelletizer
· VI forced mixer
· Mixing machine W series
· Powder machine ZSJ series vibrating screen
· FZ series of crushing granulator
· Chinese medicine grinder
· DWT series of drier for dehydrated vegetables
· Multi-layer belt dryer

Copyright 2013 Chang Zhou Zhizun Machinery Co.,Ltd All Rights Reserved.Design by Reach.
Tel:86.519-88906508 Fox:86.519-88902679 Add:Jiaoxi Changzhou Jiangsu Pro China P.C:213116

国产情侣一区二区三区| 久久亚洲精品无码va白人极品| 亚洲日本一本dvd高清| 色综合久久婷婷五月| 国产玉足榨精视频在线观看| 欧美多人片高潮野外做片黑人| 亚洲综合天堂av网站在线观看| 日韩av无码一区二区三区不卡毛片| 中日韩精品无码一区二区三区| 亚洲国产精品尤物yw在线| 综合欧美丁香五月激情| 国产suv精品一区二人妻| 国产麻豆精品乱码一区| 久久亚洲精品成人无码网站 | 三上悠亚精品一区二区久久| 国产精品揄拍100视频| 国产va精品午夜福利视频| 国产熟女乱子视频正在播放| 国产午夜福利精品一区二区三区| 欧美韩中文精品有码视频在线| 欧美野性肉体狂欢大派对| 国产午夜福利精品久久2021| 性开放的女人aaa片| 欧美freesex黑人又粗又大| 国产亚洲精品一区二区在线观看| 男人边吻奶边挵进去视频| 久久九九精品国产综合喷水| 高潮流白浆潮喷在线播放视频 | 国产成人综合久久免费| 国产男女猛烈无遮挡免费网站| 人妻精品国产一区二区| 国产肥熟女视频一区二区三区| 在线观看国产成人av天堂| 国内精品久久久久久无码| 色婷婷综合久久久久中文| 国精品午夜福利视频导航| 亚洲色 国产 欧美 日韩| 国产精品午夜爆乳美女视频| 一本久久a久久免费精品不卡| 人妻互换一二三区激情视频| 无遮挡午夜男女xx00动态|